|
 |
 |
FPC Equipment |
 |
 NC Drill Machine
- Model No : Hitachi (ND-6NE210E)
- Quantity : 2 SETS
- Function : To drill the TH and Guide Hole
- Specification : Drill size 0.1 mm
- Tolerance +/- 0.025mm
- Speed : 20 K RPM
|
 Cu Plating Machine
- Model No : TRM Cu plating machine
- Quantity : 1 SET
- Function : plating the Cu in through
- hole and surface to
- connecting both side
- Specification : Cu Thickness 8um -> 20um
- Plating Uniformity > 90%
|
 Laser Direct Image (LDI)
- Model No : Orbotech paragon 8000M
- Quantity : 4 Sets
- Function : Exposure of Pattern and PSR
- Specification
- Pattern : Pitch : 50 um
- Registration < 24 um
- PSR : Legend Mask Registration
- +/- 0.025mm
- Solder Dam 75 um
|
 DES Machine
- Model No : Kuttler DES line
- Quantity : 1 SET
- Function : Pattern Develop, Etching
- and Stripping
- Specification : after etching of line wide
- +/- 10 %
|
 Auto Optical Inspection (AOI)
- Model No : Orbotech discovery 6
- Quantity : 1 SET
- Function : Pattern inspection after Etching
- Specification : Pitch 100 um
|
 PSR printing machine
- Model No : Serial (SSA-PD560A)
- Quantity : 2 SETS
- Function : PSR printing
- Specification : 8 um -> 25 um
|
|
Punching Machine
- Model No : TRM 25 T
- Quantity : 5 SETS
- Function : Cover lay and Finish board
- punching
- Specification : +/- 0.05 um
|
 Punching Machine
- Model No : TRM 11 T
- Quantity : 10 SETS
- Function : Cover lay and
- Finish board
- punching
- Specification : +/- 0.05 um
|
Hole punching Machine
- Model No : Yamaha Punch T502
- Quantity : 3 SETS
- Function : Guide Hole and golden finger Punch
- Specification : +/- 0.02 mm
|
 Au/Ni Plating Machine
- Model No : Almex Au Plating Machine
- Quantity : 1 SET
- Function : Ni and Au plating of pattern
- Specification : Au thickness 0.03 -> 0.75 um
- Ni thickness 1 -> 9 um
|
E-Tester
- Model No : OHT (SX- 7500)
- Quantity : 1 SET
- Function : Open and Short test
- Specification : Test point 2048(MAX)
- Pitch 20 um
|
|
|
 |
|
   
|
